There's no real right or wrong way to apply 3C Revive & Protect Surface Sealer except for the fact that however you do it, you'll need to spread it around on the surface and make sure there's no residue left.

After much testing at HQ here, we've found the very best way to achieve this is to use a dry lint-free style cloth.

Simply pour a small amount of the wet product directly onto your cloth, sponge or brush then apply it to the chosen substrate and gently rub in small circular motion to cover the area.

INSTRUCTIONS OF USE:

- Shake well before use
- Make sure surface is clean and dry before application
- Apply small amounts of solution to the surface with a cloth, brush or sponge
- For porous surfaces, leave for 15 minutes before removing excess solution
- For non-porous surfaces, leave for 45 minutes before removing excess solution
- Add additional coats to improve colour enhancement

At a glance instructions are available as an image in the small gallery below.  

The quick answer is yes! You can add additional coats to improve colour enhancement. Once your first layer is dry, you can apply product straight onto the cured liquid.

This is especially good for enhancing the look or deepening the colour and/or shine for desired aesthetics.